Hot Products
- Carbon & Carbon Alloy Steel
- Stainless Steel
- Copper & Nickel Alloy
- Heat Efficiency Tubes
- Pipe Fittings
- Pipe Flanges
- Gasket, Stud Bolt &Nut
- Industrial Valves
0102030405
Welded Circular Steel Tubes EN 10296-2 for Mechanical Use - China Suppliers and Factory
Normative References
The standard refers to other EN and ISO standards for testing, dimensions, and material properties, such as:
- EN 10027 — Steel designation systems
- EN 10204 — Inspection documents
- EN ISO 377 — Sample preparation for testing
Ordering Information
When ordering tubes conforming to EN 10296-2, the following must be specified:
- Quantity — length, number of pieces, or total mass
- Dimensions — outside diameter, wall thickness, length
- Steel grade — e.g., E235, E355, etc.
- Delivery condition — e.g., as-welded, heat-treated, cold-worked
- Type of inspection and testing — e.g., destructive / non-destructive testing
- Inspection certificate — e.g., EN 10204 3.1 or 3.2
- Special requirements — if any, e.g., surface treatment, special tolerances
Steel Grades and Chemical Composition
The standard covers non-alloy and alloy steel grades, including:
- Non-alloy steels: E235, E275, E355 — with specified yield strengths
- Alloy steels: Grades with higher mechanical properties — e.g., for high-stress applications
⚗️ Chemical composition must comply with specified limits for C, Si, Mn, P, S, and other alloying elements.
Mechanical Properties
Key mechanical properties include:
- Tensile strength — e.g., 360–510 MPa for E355
- Yield strength — e.g., min. 235 MPa for E235
- Elongation — varies by grade and thickness
🔩 Mechanical properties may vary based on heat treatment condition — e.g., normalized, annealed, or as-welded.
Inspection and Testing Requirements
Tubes must undergo:
- Visual inspection — surface defects, weld integrity
- Dimensional checks — diameter, wall thickness, straightness
- Mechanical testing — tensile, hardness, bend tests
- Non-destructive testing (NDT) — if specified, e.g., ultrasonic or eddy current testing
- Hydrostatic testing — optional, if required
📋 Sampling frequency depends on batch size and customer requirements.
Tolerances
The standard defines tolerances for:
- Outside diameter — e.g., ±1% for diameters > 30 mm
- Wall thickness — varies by manufacturing method
- Length — for cut tubes, typically +10 mm / –0 mm
- Straightness — e.g., max. deviation of 1.5 mm/m
Marking and Documentation
- Mandatory marking: Manufacturer's name, steel grade, dimensions, standard number (EN 10296-2)
- Optional marking: Heat number, inspection stamp
- Delivery documents: EN 10204 3.1 or 3.2 certificate — depending on inspection level
Surface Condition and Protection
- Tubes must be free from harmful defects — cracks, excessive scaling
- Surface treatment — e.g., oiling, painting — may be specified
📌 Conclusion: EN 10296-2 ensures welded steel tubes meet mechanical, dimensional, and quality requirements for engineering applications. The latest version incorporates updated testing methods and material specifications. For exact details, refer to the official standard document.
📩 Want to order the same? Contact us Now to send your request!
🔍 Frequently Asked Questions (FAQ)
What is EN 10296-2 and what does it cover?
EN 10296-2 is a European standard that specifies technical delivery conditions for welded circular steel tubes used in mechanical and general engineering purposes. It defines requirements for steel grades, chemical composition, mechanical properties, tolerances, inspection, and documentation.
What steel grades are available under EN 10296-2?
The standard covers both non-alloy steels — such as E235, E275, and E355 — and alloy steels with enhanced mechanical properties for high-stress engineering applications. Each grade has defined yield strength, tensile strength, and elongation requirements.
What information is required when placing an order for EN 10296-2 tubes?
When ordering, you must specify the quantity, dimensions (outside diameter, wall thickness, length), steel grade, delivery condition, type of inspection and testing, inspection certificate type (EN 10204 3.1 or 3.2), and any special requirements such as surface treatment or custom tolerances.
What types of testing are required for EN 10296-2 tubes?
Tubes must pass visual inspection, dimensional checks, and mechanical testing (tensile, hardness, and bend tests). Non-destructive testing (NDT) such as ultrasonic or eddy current testing may be required if specified, along with optional hydrostatic testing depending on customer requirements.
What are the dimensional tolerances defined in EN 10296-2?
The standard defines tolerances for outside diameter (e.g., ±1% for diameters over 30 mm), wall thickness (varies by manufacturing method), cut length (typically +10 mm / –0 mm), and straightness (max. deviation of 1.5 mm/m).
What documentation is required for delivery of EN 10296-2 tubes?
Mandatory marking includes the manufacturer's name, steel grade, dimensions, and the standard number EN 10296-2. Delivery must be accompanied by an EN 10204 inspection certificate — either 3.1 or 3.2 — depending on the agreed level of inspection. Optional markings include the heat number and inspection stamp.