Hot Products
- Carbon & Carbon Alloy Steel
- Stainless Steel
- Copper & Nickel Alloy
- Heat Efficiency Tubes
- Pipe Fittings
- Pipe Flanges
- Gasket, Stud Bolt &Nut
- Industrial Valves
0102030405
China Suppliers Factory ASTM A252 Welded and Seamless Steel Pipe Piles for Structural Support
Ordering Information
Buyers should specify the following when ordering:
- Quantity (number of pipes or total length)
- Nominal size (outside diameter and wall thickness)
- Length (random or specific)
- Grade (see Steel Grades section)
- End finish (plain, beveled, or special)
- Surface condition (bare or coated)
- Additional testing (if required, e.g., hydrostatic, nondestructive testing)
- ASTM designation and year of standard (e.g., ASTM A252-24)
Steel Grades
Three grades based on yield strength:
| Grade | Min. Yield Strength (ksi) | Min. Yield Strength (MPa) |
|---|---|---|
| Grade 1 | 30 ksi | 205 MPa |
| Grade 2 | 35 ksi | 240 MPa |
| Grade 3 | 45 ksi | 310 MPa |
💡 Note: Higher grades offer increased strength for demanding load conditions.
Manufacturing Process
- Seamless or welded (electric resistance welded, submerged arc welded, etc.)
- Welded pipes must meet specified weld quality standards
Chemical Composition
- Carbon, manganese, phosphorus, sulfur, and other elements must comply with limits specified for each grade
- Heat analysis is required; product analysis may be requested by the buyer
Mechanical Properties
- Tensile and yield strength: As per grade requirements
- Elongation: Minimum percentages specified based on wall thickness
Inspection and Testing Requirements
- Visual inspection: For surface defects, straightness, and workmanship
- Dimensional checks: Outside diameter, wall thickness, and length
- Mechanical tests: Tensile tests (one per lot or as agreed)
- Hydrostatic testing: Optional unless specified by the buyer
- Nondestructive testing (NDT): Optional for weld seams if required
Marking
Each pipe must be marked with:
- Manufacturer's name or trademark
- ASTM A252 grade
- Nominal size
- Heat number or identification
Keywords
Steel pipe piles
Foundation support
Welded pipe
Seamless pipe
Structural piles
Certification
Manufacturer must provide a test report confirming compliance.
Additional Notes
● Latest Version: Confirm the current version (e.g., ASTM A252-24) on the ASTM website.
● Conformance: Pipes must meet both ASTM A252 and any additional project specifications.
● Latest Version: Confirm the current version (e.g., ASTM A252-24) on the ASTM website.
● Conformance: Pipes must meet both ASTM A252 and any additional project specifications.
📩 Want to order the same? Contact us Now to send your request!
Frequently Asked Questions (FAQ)
What is ASTM A252 and what is it used for?
ASTM A252 is a standard specification covering welded and seamless steel pipe piles used in foundation support applications. These piles are driven into the ground to support structural loads for buildings, bridges, and other civil engineering projects.
What are the differences between Grade 1, Grade 2, and Grade 3 in ASTM A252?
The three grades differ in minimum yield strength: Grade 1 offers 30 ksi (205 MPa), Grade 2 offers 35 ksi (240 MPa), and Grade 3 offers 45 ksi (310 MPa). Higher grades are selected for projects that require greater load-bearing capacity and structural strength.
Are ASTM A252 pipe piles available in both seamless and welded forms?
Yes. ASTM A252 pipe piles can be manufactured as seamless or welded pipes, including electric resistance welded (ERW) and submerged arc welded (SAW) types. All welded pipes must meet the specified weld quality standards defined in the specification.
What information should I provide when placing an order for ASTM A252 pipe piles?
When ordering, buyers should specify the quantity, nominal size (OD and wall thickness), length, grade, end finish, surface condition, any required testing (hydrostatic or NDT), and the applicable ASTM designation and year (e.g., ASTM A252-24).
Is hydrostatic or nondestructive testing mandatory for ASTM A252 pipe piles?
No, hydrostatic testing and nondestructive testing (NDT) are optional under ASTM A252 unless specifically requested by the buyer or required by the project specifications. However, visual inspection and dimensional checks are standard requirements.
What certifications or documentation are required for ASTM A252 pipe piles?
The manufacturer must provide a test report confirming compliance with ASTM A252. Each pipe must also be clearly marked with the manufacturer's name or trademark, ASTM A252 grade, nominal size, and heat number or identification for full traceability.