Hot Products
- Carbon & Carbon Alloy Steel
- Stainless Steel
- Copper & Nickel Alloy
- Heat Efficiency Tubes
- Pipe Fittings
- Pipe Flanges
- Gasket, Stud Bolt &Nut
- Industrial Valves
0102030405
China ASTM A252 Steel Pipe Piles Suppliers - Welded & Seamless Factory Options for Foundations & Retaining Walls
Ordering Information
Buyers should specify the following when ordering:
- Quantity (number of pipes or total length)
- Nominal size (outside diameter and wall thickness)
- Length (random or specific)
- Grade (see Steel Grades section)
- End finish (plain, beveled, or special)
- Surface condition (bare or coated)
- Additional testing (if required, e.g., hydrostatic, nondestructive testing)
- ASTM designation and year of standard (e.g., ASTM A252-24)
Steel Grades
Three grades based on yield strength:
| Grade | Min. Yield Strength (ksi) | Min. Yield Strength (MPa) |
|---|---|---|
| Grade 1 | 30 ksi | 205 MPa |
| Grade 2 | 35 ksi | 240 MPa |
| Grade 3 | 45 ksi | 310 MPa |
💡 Note: Higher grades offer increased strength for demanding load conditions.
Manufacturing Process
- Seamless or welded (electric resistance welded, submerged arc welded, etc.)
- Welded pipes must meet specified weld quality standards
Chemical Composition
- Carbon, manganese, phosphorus, sulfur, and other elements must comply with limits specified for each grade
- Heat analysis is required; product analysis may be requested by the buyer
Mechanical Properties
- Tensile and yield strength: As per grade requirements
- Elongation: Minimum percentages specified based on wall thickness
Inspection and Testing Requirements
- Visual inspection: For surface defects, straightness, and workmanship
- Dimensional checks: Outside diameter, wall thickness, and length
- Mechanical tests: Tensile tests (one per lot or as agreed)
- Hydrostatic testing: Optional unless specified by the buyer
- Nondestructive testing (NDT): Optional for weld seams if required
Marking
Each pipe must be marked with:
- Manufacturer's name or trademark
- ASTM A252 grade
- Nominal size
- Heat number or identification
Keywords
🔩 Steel pipe piles
🏗️ Foundation support
⚙️ Welded pipe
🔧 Seamless pipe
🏛️ Structural piles
Certification
Manufacturer must provide a test report confirming compliance.
Additional Notes
- Latest Version: Confirm the current version (e.g., ASTM A252-24) on the ASTM website
- Conformance: Pipes must meet both ASTM A252 and any additional project specifications
📩 Want to order the same? Contact us Now to send your request!
❓ Frequently Asked Questions (FAQ)
Q
What is ASTM A252 and what is it used for?
ASTM A252 is a standard specification that covers welded and seamless steel pipe piles used for foundation support in construction. These piles are driven into the ground to transfer structural loads to deeper, more stable soil or rock layers.
Q
What are the three grades available under ASTM A252?
ASTM A252 includes three grades: Grade 1 (minimum yield strength 30 ksi / 205 MPa), Grade 2 (minimum yield strength 35 ksi / 240 MPa), and Grade 3 (minimum yield strength 45 ksi / 310 MPa). Higher grades are selected for more demanding load conditions.
Q
What manufacturing methods are allowed under ASTM A252?
ASTM A252 pipe piles can be manufactured as seamless or welded pipes. Welding methods include electric resistance welding (ERW) and submerged arc welding (SAW). All welded pipes must meet specified weld quality standards to ensure structural integrity.
Q
Is hydrostatic testing mandatory for ASTM A252 pipe piles?
No, hydrostatic testing is optional under ASTM A252 unless specifically requested by the buyer. Similarly, nondestructive testing (NDT) for weld seams is optional and must be agreed upon between the buyer and manufacturer before ordering.
Q
What information must be marked on each ASTM A252 pipe pile?
Each pipe pile must be clearly marked with the manufacturer's name or trademark, the ASTM A252 grade designation, the nominal pipe size, and the heat number or identification code for traceability purposes.
Q
What should buyers specify when placing an order for ASTM A252 pipe piles?
Buyers should specify the quantity, nominal size (OD and wall thickness), required length, steel grade, end finish type (plain, beveled, or special), surface condition (bare or coated), any additional testing requirements, and the applicable ASTM designation including the year (e.g., ASTM A252-24).